We have all done it. Some of us do it darn near every day! You got the good glue. You are trucking along with your project, sticking parts together and spritzing them to instantly set the CA Glue and you notice….that your fingers are glued to your fingers. Maybe you even glued yourself to the project! Well, we have a pretty good solution:
UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option.
Works on all Super glues.
This is sold in a 1 oz bottle